Conducting wildfire burns (drainage) is an effective way to clear weeds and other flammable vegetation, but safety is the primary consideration. Here is guidance on when to conduct wildfire burns: **Safest Seasons:** In most areas, the best time to conduct wildfire burns is: 1. Late Winter/Early Spring (February to April): whitelist During this time, the weather is usually cooler and weeds and foliage are lush, making burns easier to control. Fires are also slower and more predictable. 2. Late Fall (September to November): Vegetation is usually dormant, reducing the risk of an unexpected fire spreading. **Optimal Weather Conditions:** When planning a wildfire burn, consider the following weather conditions: 1. **Wind:** Avoid conducting a wildfire burn on days with strong winds (over 10-15 mph) as this can make the fire difficult to control. 2. **Humidity:** High relative humidity (over 50%) is ideal as it slows the spread of a fire. Low humidity can cause a fire to spread out of control. 3. **Temperature:** Keep temperatures moderate (less than 70°F/21°C) to prevent the fire from spreading too quickly. If temperatures are too high, the fire danger will increase. 4. **Rainfall:** Plan your wildfire burns after recent or expected rainfall days, as this will keep the ground moist and reduce the risk of fire spread. 5. **Atmospheric Conditions:** Avoid burning during temperature inversions, fog, or when winds are blowing flames toward flammable materials. **Other Considerations:** 1. **Fuel Load:** Remove large amounts of combustible material (e.g., dry grass, dead trees) to prevent the fire from spreading out of control. 2. **Water Supply:** Make sure there is a water source on site (e.g., hose, fire extinguisher) in case it is needed. 3. **Safety Equipment:** Wear protective clothing, including gloves, safety glasses, a fire-resistant mask, and long sleeves. 4. **Notify Authorities:** Notify your local fire department, neighbors, and agencies before starting a wildfire burn. 5. **Follow regulations:** Familiarize yourself with local regulations and laws regarding wildfire burns and make sure you have the necessary permits to conduct a wildfire burn. **Additional Tips:** 1. Start with small, controlled burns to assess conditions and ensure you can conduct the burn safely and effectively. 2. Use fire breaks (e.g., driveways, firebreaks) to contain the fire. 3. Allow adequate time to complete the burn and make sure you inspect the site after the flames are out. When conducting a wildfire burn, always prioritize your safety, the safety of others, and the safety of your surroundings. Use caution and follow the relevant guidelines and regulations that apply to your area.